67 Crankshaft pulley

[Mark P.]

Re: 67 Crankshaft pulley

I have a 67 base engine car that was equipped with the K19, AC and power steering. It has the dual groove crankshaft pulley and the add on pulley. The K19 was removed by a previous owner. All three grooves are used.

Mark

[Joe L.]

Re: 67 Crankshaft pulley

I have a 67 base engine car that was equipped with the K19, AC and power steering. It has the dual groove crankshaft pulley and the add on pulley. The K19 was removed by a previous owner. All three grooves are used.

Mark

Mark------


Yes, and the 2 groove pulley should be of GM #3850838 and the 1 groove add-on pulley of GM #3751232.

By the way, the GM #3850838 is long-since GM-discontinued. However, the GM #3751232 which was first used for some passenger car applications for the 1958 model year, is still available from GM 52 years after its original release!

[John H.]

Re: 67 Crankshaft pulley

john

Was that for all base engines ? What about if it had C60 and N40 ? Would it have the double pulley and then the add on ?.

The AIM shows a car with C60,N40 and K19 has no less than 5 seperate fan belts !!

thanks

John -

The base 300hp engine used the single-groove crank pulley only with or without power steering. C60 and/or K19 changed it.