1966 Grill Bracket Screws

[Walter R.]

I am in the process of installing grill. Zip list phillips head screws as avalible and I purchased. These screws attach the grill bracket to the bracket that is rivited to the body. I am in need of the 4 screws and attaching nut that fastens grill to bracket. These screws would be 3/16". I called Zip and they have no listing. Would anyone know if they are available?

[Jack M.]

Walter- Many of the 1966 AIM's are missing page (UPC 11-13) (SHEET B-1)
See if this page helps with your part numbers to order:
1966 Corvette AIM (UPC 11-13, Sheet B1)-01.jpg
1966 Corvette AIM (UPC 11-13, Sheet B1)-02.jpg

[Robert P.]

Zip # GR-335 should be the ones
Bob

[Walter R.]

The screws or bolts I am in need of attach the grill to the bracket the attaches to the brackets on the body. That page does not show those screws/bolts. GR-335 are not the screws I need as the screws would have to be 3/16 as the hole in the bracket as well as the grill is 3/16". GR-335 is 1/4". I would believe it would possibly be the same type of phillips head screw but 3/16"

[Gary B.]

Walter,

Are you talking about attaching the bracket that is riveted to the grill?

Gary

[Tom D.]

Or the bracket riveted to the fiberglass body? grille bracket - 1 (1).jpg

[Walter R.]

That is it. The brackets are rivited to the grill. I had evidently read it incorrectly. I thought the brackets that are attached to the body were the only ones rivited. Thank you for the clarification.

[Robert P.]

The brackets to the fiberglass body are 3/16 rivets and the correct screws for the grille to brackets are the 1/4 20 screws with captured washers which I posted
Bob

[Walter R.]

Is the head on the outside of the grill and it is peened on the inside?

[Joseph S.]

The screws or bolts I am in need of attach the grill to the bracket the attaches to the brackets on the body. That page does not show those screws/bolts. GR-335 are not the screws I need as the screws would have to be 3/16 as the hole in the bracket as well as the grill is 3/16". GR-335 is 1/4". I would believe it would possibly be the same type of phillips head screw but 3/16"

Walter, The small brackets are attached to the grill with Aluminum button head rivets, not screws.

[Mike M.]

Is the head on the outside of the grill and it is peened on the inside?

Walter - the rivets are all oriented from the top down and peened on the bottom.