Technical Discussion Archives - NCRS Discussion Boards

If this is your first visit, be sure to check out the FAQ You must be an NCRS member before you can post: click the Join NCRS link above to join. To start viewing messages, select the forum that you want to visit from the selection below. If you have trouble logging in you can clear your cookies here!

Topics	Statistics	Last Post
Sticky: Archive Posts From 1998 - February 2008 by John W. Started by John W., February 29, 2008, 05:10 PM	0 responses 2,577 views 0 reactions	Last Post by John W. February 29, 2008, 05:10 PM
C2 Oil Leak - Distributor seal (?) by David W. Started by David W., April 1, 2007, 06:35 PM	7 responses 46 views 0 reactions	Last Post by Jean C. April 2, 2007, 09:01 AM
65 Park brake assy. ?? by Dick G. Started by Dick G., April 1, 2007, 11:08 AM	1 response 42 views 0 reactions	Last Post by Eugene B. April 2, 2007, 08:32 AM
What is diameter of push rod in 68/390hp? by Terry F. Started by Terry F., April 1, 2007, 11:10 AM	20 responses 84 views 0 reactions	Last Post by Clem Z. April 2, 2007, 07:07 AM
C-1 1959 Hood by Jerry C. Started by Jerry C., April 1, 2007, 10:26 AM	2 responses 24 views 0 reactions	Last Post by Terry D. April 2, 2007, 06:45 AM
#34 Our Meat Delivered Fresh Daily NM by Geoff C. Started by Geoff C., April 1, 2007, 03:49 PM	1 response 37 views 0 reactions	Last Post by Terry D. April 2, 2007, 06:42 AM
C3 (69) Blues by Rob M. Started by Rob M., March 28, 2007, 03:15 PM	11 responses 63 views 0 reactions	Last Post by Rob M. April 2, 2007, 02:29 AM
4-4-63 Corvette by William L. Started by William L., March 30, 2007, 04:21 PM	23 responses 35 views 0 reactions	Last Post by Philip C. April 2, 2007, 12:38 AM
Tailshaft ID help by Boyan B. Started by Boyan B., April 1, 2007, 11:01 PM	1 response 20 views 0 reactions	Last Post by Joe L. April 1, 2007, 11:39 PM
relay switch by david crenshaw Started by david crenshaw, April 1, 2007, 07:22 PM	2 responses 11 views 0 reactions	Last Post by Joe L. April 1, 2007, 10:51 PM
What is point deduct C2 P.S. control valve? by Stan E. Started by Stan E., March 30, 2007, 08:17 PM	8 responses 46 views 0 reactions	Last Post by Joe L. April 1, 2007, 10:47 PM
Battery Access by Joseph C. Started by Joseph C., April 1, 2007, 04:10 PM	1 response 43 views 0 reactions	Last Post by Peter L. April 1, 2007, 10:14 PM
Fuel Tank Install by Allan J. Wicklund Started by Allan J. Wicklund, March 31, 2007, 09:13 PM	6 responses 124 views 0 reactions	Last Post by Allan J. Wicklund April 1, 2007, 08:56 PM
54 dash paint by Benjamin C. Started by Benjamin C., April 1, 2007, 08:28 PM	2 responses 22 views 0 reactions	Last Post by Roy B. April 1, 2007, 08:51 PM
door glass weather stripping by Ken B. Started by Ken B., April 1, 2007, 02:55 PM	3 responses 36 views 0 reactions	Last Post by Ken B. April 1, 2007, 08:28 PM
Re: 1967 Rear Suspension Rebuild by John H. Started by John H., April 1, 2007, 07:47 PM	0 responses 58 views 0 reactions	Last Post by John H. April 1, 2007, 07:47 PM
1961 Oil canister gasket by Ron Gaal Started by Ron Gaal, April 1, 2007, 04:29 PM	3 responses 20 views 0 reactions	Last Post by Joe L. April 1, 2007, 06:30 PM
are BB and SB forks the same? by Bill S. Started by Bill S., March 27, 2007, 06:47 PM	13 responses 48 views 0 reactions	Last Post by Terry F. April 1, 2007, 05:47 PM
C2 caliper rebuilding? by Brian K. Started by Brian K., March 31, 2007, 09:33 PM	6 responses 58 views 0 reactions	Last Post by Patrick H. April 1, 2007, 04:22 PM
auroragh@aol.com by Gordon H. Started by Gordon H., April 1, 2007, 02:37 PM	0 responses 7 views 0 reactions	Last Post by Gordon H. April 1, 2007, 02:37 PM
C2 1966 Interior Rear Qtr Panels fasteners by John L. Started by John L., April 1, 2007, 02:28 PM	0 responses 24 views 0 reactions	Last Post by John L. April 1, 2007, 02:28 PM
PH Levels in Cooling Systems by Gary Bishop Started by Gary Bishop, April 1, 2007, 08:41 AM	3 responses 44 views 0 reactions	Last Post by Duke W. April 1, 2007, 01:39 PM
Help 67 Inst Bulbs ?257 flashing? by Bob #36542 Started by Bob #36542, March 31, 2007, 04:49 PM	5 responses 40 views 0 reactions	Last Post by Bob #36542 April 1, 2007, 01:19 PM
65 Odometer trip cable routing? by Dick G. Started by Dick G., March 31, 2007, 05:40 PM	4 responses 195 views 0 reactions	Last Post by Patrick T. April 1, 2007, 11:13 AM
68 key question by Kurt B. Started by Kurt B., March 31, 2007, 05:35 PM	10 responses 48 views 0 reactions	Last Post by Peter L. April 1, 2007, 10:54 AM
C2, bumper backside pitting,points? by Ray G. Started by Ray G., April 1, 2007, 02:54 AM	1 response 19 views 0 reactions	Last Post by Gene M. April 1, 2007, 10:41 AM
'71 C60 belt number by Joe G. Started by Joe G., March 31, 2007, 11:04 PM	2 responses 12 views 0 reactions	Last Post by Joe G. April 1, 2007, 10:36 AM
63 horns. by Richard S. Started by Richard S., April 1, 2007, 09:44 AM	1 response 54 views 0 reactions	Last Post by Sydney G. April 1, 2007, 10:22 AM
67 rally wheel inside color by Richard B. Started by Richard B., March 31, 2007, 05:10 PM	13 responses 72 views 0 reactions	Last Post by Richard B. April 1, 2007, 09:44 AM
speaker grill paint by Mike Barnard Sr No 36249 Started by Mike Barnard Sr No 36249, March 28, 2007, 07:38 PM	4 responses 75 views 0 reactions	Last Post by Mike Barnard Sr No 36249 April 1, 2007, 09:31 AM
'62 wheels & tires by steve studer Started by steve studer, March 31, 2007, 01:24 PM	5 responses 86 views 0 reactions	Last Post by Joe M. April 1, 2007, 07:55 AM
C1 Door Posts by Mike Przano Started by Mike Przano, April 1, 2007, 07:49 AM	0 responses 38 views 0 reactions	Last Post by Mike Przano April 1, 2007, 07:49 AM
67 Birthdate. by Richard S. Started by Richard S., March 29, 2007, 04:09 PM	8 responses 52 views 0 reactions	Last Post by Richard S. April 1, 2007, 07:41 AM
C1 Harmonic Balancer by Jeff M. Started by Jeff M., March 30, 2007, 09:00 PM	5 responses 85 views 0 reactions	Last Post by John T. April 1, 2007, 07:13 AM
1954 oil pan by Ted K. Started by Ted K., March 31, 2007, 09:41 PM	2 responses 28 views 0 reactions	Last Post by Wayne P. April 1, 2007, 05:34 AM
C2 J56 PROPORTIONING VALVE