1954 Acellerator Kick Down Rod Lever at Transmission- Information Needed

[John L.]

I need some help in identifying the correct lever or bellcrank that attches to the drivers side of the transmission that the accelerator kick down rod attaches to. As I recall the shaft on the transmission that this attaches to is a low speed shaft but cannot recall for certain. I have see levers that are straight and others in an "L" shaped. Having a time finding this little guy. A photo for reference would be most helpful....
Thanks,
John Lanning

[Peter R.]

Re: 1954 Acellerator Kick Down Rod Lever at Transmission- Information Needed

John, Hope this picture helps--it's a little fuzzy. Pete

[John L.]

Re: 1954 Acellerator Kick Down Rod Lever at Transmission- Information Needed

Thanks Peter - good photo of what I should be looking for...
Now to find one.
John Lanning

[Troy P.]

Re: 1954 Acellerator Kick Down Rod Lever at Transmission- Information Needed

I'm pretty sure this is the same lever used on passenger cars. If so they should be everywhere. Check early parts books to confirm.

[Guy M.]

Re: 1954 Acellerator Kick Down Rod Lever at Transmission- Information Needed

John, nothing like a treasure hunt, I think I have what you need. PM me with your address and Ill send it. Merry X-mas. Some one did that for me and I was most appreciative. Guy

[John L.]

Re: 1954 Acellerator Kick Down Rod Lever at Transmission- Information Needed

Guy - Thank you so much...will PM you......that is what is so great about this forum and members. We are trying to help each other through our respective projects. I will do the same for another too.
Best,
John L