1966 425 Heads picture

[Anthony S.]

Could someone post pictures of the front of correct heads (both drivers and pass side) for a 1966 425 HP car? Thanks in advance.T

(a search of the discussion board did not yield anything)

[Joe L.]

Re: 1966 425 Heads picture

Could someone post pictures of the front of correct heads (both drivers and pass side) for a 1966 425 HP car? Thanks in advance.T

(a search of the discussion board did not yield anything)

Anthony------


Here is an example:

[Anthony S.]

Re: 1966 425 Heads picture

Thanks Joe. What date do these have?

[William C.]

Re: 1966 425 Heads picture

The most unique feature of these heads is the provision for the sparkplug heat shield retain bolt on a small boss nest to the exhaust port. That is pretty much what makes then detectible from later heads at 10 foot distances.

[Bob J.]

Re: 1966 425 Heads picture

I thought some/all had a T casting symbol on the end of the head.......plus the spark plug barrel holes that Bill mentioned.

[Anthony S.]

Re: 1966 425 Heads picture

Or triangles markings at the front with a G Inside?

[Kenneth B.]

Re: 1966 425 Heads picture

If the part # is correct & date code is also it right.

[Joe L.]

Re: 1966 425 Heads picture

Thanks Joe. What date do these have?

Anthony-----

May 26, 1966

[Anthony S.]

Re: 1966 425 Heads picture

I believe that there are other heads that also have the heat sheld characteristic. So are there any
Other identifiers to look for? On the front part of the head?

[Anthony S.]

Re: 1966 425 Heads picture

StIll looking for more pictures. Heads as installed on a car that passes judge's eyes. Thanks....

[John H.]

Re: 1966 425 Heads picture

StIll looking for more pictures. Heads as installed on a car that passes judge's eyes. Thanks....

Tony -

Here's a '66 L-72.


66L72.jpg

[Anthony S.]

Re: 1966 425 Heads picture

John thanks for posting. This is a good view of the heat shields. But I am very interested in a close up Of the front ofthe head showing thoses details. Thanks tony