DOM, Received your Message, Cannot Respond

[Joe R.]

DOM, received your PM and tried to respond several times. Having trouble with this new system (do you hear this administrator, this new system is trash).
Anyway send me a message via my e-mail: vettenut0071946@att.net
I will respond as I have tried on this (system). Trying to be nice now!

JR

[Domenic T.]

Re: DOM, Received your Message, Cannot Respond

Joe,
Thanks, it took me a while to figure out how to send the message also.

Joe, I needed the worm gear that the speedo cable drives because it was warn.

I found it while I was doing my cluster (1967).

Dick W said you were the guy to do them but I also repaired speedo's when they were gear driven and do every thing inhouse.

Amazing how good these work once you clean the old hard grease and replace it with a good lube.

Peter H told me where to get the gear and it was only $11.95.

Corvette central had it and it made sence that that would be the gear to wear out first as it drives all the odometer & trip.

Thanks for responding.

DOM

[Joe R.]

Re: DOM, Received your Message, Cannot Respond

DOM,

You will also need the #2 gear as it usually wears out first. But here's your problem. The #1 gear is the one that is magnetized and calibrated to work with your speed cup.
You will need to take it to a speedometer shop and get them to calibrate after installing the two gears.
Without it being magnetized and calibrated it will just sit on the peg.

JR