63 Brake booster push rod - NCRS Discussion Boards

63 Brake booster push rod

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Edward J.
    Extremely Frequent Poster
    • September 15, 2008
    • 6942

    63 Brake booster push rod

    Does any one have the push rod length on the brake booster to master cylinder and inside pedal length?

    having problem getting the air out of system doesn't seem to be pushing fluid to bleeders. I am converting to power brakes with the correct 63 master and booster.

    Thanks for any help Ed
    New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.
  • John N.
    Expired
    • November 17, 2009
    • 4

    #2
    Re: 63 Brake booster push rod

    Edward

    I measured my 63 booster from the mounting flange to the tip of the rod is 1.2 inches and the center of mounting firewall flange to center of clevis hole is 3.9 inches. As both are adjustable I don't know what the factory set it at. I hope this is what you needed.

    John

    Comment

    • Edward J.
      Extremely Frequent Poster
      • September 15, 2008
      • 6942

      #3
      Re: 63 Brake booster push rod

      John, thanks for those measurements that is exactly what I need.Is your booster in the car?
      New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.

      Comment

      • John N.
        Expired
        • November 17, 2009
        • 4

        #4
        Re: 63 Brake booster push rod

        Edward
        the booster is currently out of the car due to a vacuume leak, I installed a aftermarket booster with dual master and 4 wheel disk brakes for safety reasons since I try to drive it as much as possible in the summer months

        John

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"