1967 rear stabilizer bar

[Lawrence S.]

Was there an application where a small block would have had a rear stabilizer bar?

Thanks

[Dick W.]

Re: 1967 rear stabilizer bar

Short, sweet, and simple, NO

[Lawrence S.]

Re: 1967 rear stabilizer bar

That is what I thought but wanted to double check

[Gary B.]

Re: 1967 rear stabilizer bar

Was there an application where a small block would have had a rear stabilizer bar?

Lawrence,

Not in '67, but yes in '64 and '65.

Gary

[Ridge K.]

Re: 1967 rear stabilizer bar

Short, sweet, and simple, NO

What about that short window of time in the '67 model year, when St.Louis ran out of small block hoods, .........and installed big block hoods on small bock cars?

[Wayne M.]

Re: 1967 rear stabilizer bar

(re: rear sway bar on small blocks) ... Not in '67, but yes in '64 and '65. ....Gary

Gary -- not sure about 1964, but the only way to get a rear stabilizer bar on a '65 was to order L78. Didn't matter if F40 or std. suspension, the rear bar was the same 9/16" dia.

[Gary B.]

Re: 1967 rear stabilizer bar

Gary -- not sure about 1964, but the only way to get a rear stabilizer bar on a '65 was to order L78. Didn't matter if F40 or std. suspension, the rear bar was the same 9/16" dia.

Wayne,

In '65 couldn't one get the rear bar with the L-84 engine option?

Gary

[John H.]

Re: 1967 rear stabilizer bar

In '65 couldn't one get the rear bar with the L-84 engine option?

Gary

Gary -

Nope - only a larger front bar.

[Joe L.]

Re: 1967 rear stabilizer bar

Wayne,

In '65 couldn't one get the rear bar with the L-84 engine option?

Gary

Gary------


Until 1975 the rear sway bar was not part of any small block engine option or any suspension option. It was part of all big block engine options from 1965 through 1974. All bars were 9/16"

Beginning with the 1975 model year, it became part of the FE-7 suspension option but was a different bar than that used with 65-74 big blocks. The FE-7 rear bar was about 7/16"

[Bill M.]

Re: 1967 rear stabilizer bar

Gary------


Until 1975 the rear sway bar was not part of any small block engine option or any suspension option. It was part of all big block engine options from 1965 through 1974. All bars were 9/16"

Beginning with the 1975 model year, it became part of the FE-7 suspension option but was a different bar than that used with 65-74 big blocks. The FE-7 rear bar was about 7/16"

FYI: The '75 and later FE-7 front bar got a lot bigger too, which kept a proper handling balance.

[Duke W.]

Re: 1967 rear stabilizer bar

FYI: The '75 and later FE-7 front bar got a lot bigger too, which kept a proper handling balance.

1 1/8 inch

Duke