70 350 A/C did it have front and rear baffle seals - NCRS Discussion Boards

70 350 A/C did it have front and rear baffle seals

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Steve D.
    Expired
    • May 16, 2011
    • 106

    70 350 A/C did it have front and rear baffle seals

    I did not see the front and rear baffle seal in the AIM I am replacing the support and shroud seals. I want to make sure I get them all.
  • Patrick H.
    Beyond Control Poster
    • November 30, 1989
    • 11616

    #2
    Re: 70 350 A/C did it have front and rear baffle seals

    Which ones are the "baffle seals?"
    I don't recall any seals with that name.

    Patrick
    Vice-Chairman (West), Michigan Chapter NCRS
    71 "deer modified" coupe
    72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
    2008 coupe
    Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

    Comment

    • Dennis D.
      Extremely Frequent Poster
      • February 29, 2000
      • 1071

      #3
      Re: 70 350 A/C did it have front and rear baffle seals

      Originally posted by Steve Dunn (53331)
      I did not see the front and rear baffle seal in the AIM I am replacing the support and shroud seals. I want to make sure I get them all.
      If you're referring to the lower metal baffle shield,(which has front and rear seals), your car shouldn't have one

      Comment

      • Steve D.
        Expired
        • May 16, 2011
        • 106

        #4
        Re: 70 350 A/C did it have front and rear baffle seals

        I can`t figure out if this is just a seperate part of the radiator support or does it fit on the lip of the radiator.

        me > Overstock Sale > 1968-1970 Corvette Radiator Upper Front Baffle Rubber Seal Replaces GM 3919753 USA Blueprint Accurate (See Item K)
        1968-1970 Corvette Radiator Upper Front Baffle Rubber Seal Replaces GM 3919753 USA Blueprint Accurate (See Item K)






        Price: $5.00

        Item Number: 1274401
        Quantity:
        * Whole number only




        1968-1970 Corvette Radiator Upper Front Baffle Rubber Seal Replaces GM 3919753. Die cut sponge rubber with PSA (pressure sensitive adhesive) mounts on front upper surface of the lower baffle. Blueprint accurate. None better. Made in Bridgeport, CT USA

        Comment

        • Dennis D.
          Extremely Frequent Poster
          • February 29, 2000
          • 1071

          #5
          Re: 70 350 A/C did it have front and rear baffle seals

          Is that pic from the doc's site???

          Comment

          • Steve D.
            Expired
            • May 16, 2011
            • 106

            #6
            Re: 70 350 A/C did it have front and rear baffle seals

            That is it. You or least I cannot tell if that is a raditor support or a raditor.

            Comment

            • Dennis D.
              Extremely Frequent Poster
              • February 29, 2000
              • 1071

              #7
              Re: 70 350 A/C did it have front and rear baffle seals

              Your pic is definitely a support. Just appears to be the 68 version, showing the K/L seals belonging to the lower metal baffle in my pic. I should also say the metal setup appears on the 70 SB but not the A/C variety.
              Here's a pic from a vintage doc catalog,(vol.26 with the helicopter cover) showing the supports. Think you're referencing the wrong support

              Last edited by Dennis D.; August 31, 2011, 08:23 PM.

              Comment

              • Steve D.
                Expired
                • May 16, 2011
                • 106

                #8
                Re: 70 350 A/C did it have front and rear baffle seals

                Thanks Dennis.

                Comment

                Working...
                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"