Correct coatings on reproduction trailing arm bolt and rear spring mount plate bolt - NCRS Discussion Boards

Correct coatings on reproduction trailing arm bolt and rear spring mount plate bolt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Patrick H.
    Beyond Control Poster
    • December 1, 1989
    • 11616

    #16
    Re: Correct coatings on reproduction trailing arm bolt and rear spring mount plate bo

    Originally posted by Joe Lucia (12484)
    Ron------


    I seriously doubt that any judge will ever see the headmarkings on these trailing arm pivot bolts except, perhaps, those doing a Survivor judging.
    Nope.
    We just look to see if they look like they've been there 40 years or not. It's usually not hard to tell.

    Patrick
    Vice-Chairman (West), Michigan Chapter NCRS
    71 "deer modified" coupe
    72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
    2008 coupe
    Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

    Comment

    • Rich C.
      Expired
      • January 1, 1994
      • 383

      #17
      Re: Correct coatings on reproduction trailing arm bolt and rear spring mount plate bo

      Regarding the leaf spring plate bolts; thought they were a white cadmium or similar, my originals (correct headmarks) sure didn't look like black oxide!

      '73 LS-4 454

      Comment

      • John H.
        Beyond Control Poster
        • December 1, 1997
        • 16513

        #18
        Re: Correct coatings on reproduction trailing arm bolt and rear spring mount plate bo

        Originally posted by Rich Cousineau (23820)
        Regarding the leaf spring plate bolts; thought they were a white cadmium or similar, my originals (correct headmarks) sure didn't look like black oxide!

        '73 LS-4 454
        Rich -

        For all practical purposes, there are NO black oxide bolts anywhere on a Corvette; the spring retainer plate bolts are phosphated.

        Comment

        • Rich C.
          Expired
          • January 1, 1994
          • 383

          #19
          Re: Correct coatings on reproduction trailing arm bolt and rear spring mount plate bo

          Thanks, thats what mine look like!

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"