Front wheel bearing
What is the proper way to remove the inner race of the inside front wheel ball bearing? Mine are on pretty tight. I don't want to try force if there is better way.
Steve
Steve
-
Opportunity is missed by most people
because it is dressed in overalls and looks like work.
Thomas Edison -
Re: Front wheel bearing
Take it to a machine shop! They can press it out. -
Re: Front wheel bearing
Not the outer race in the hub, but the inner race on the spindle.Opportunity is missed by most people
because it is dressed in overalls and looks like work.
Thomas EdisonComment
-
Re: Front wheel bearing
This one?......Maybe try some heat with a propane torch? Then a few taps with a tapered cold chisel around the perimeter where it seats onto the backing plate. If I recall they are a slight press fit.
When I did these I had everything apart so I think I just put the nut on the spindle and tapped it with a brass hammer while supporting the backing plate.
Rich
Comment
Comment