Door hinge pins and bushings parts no. help

[Edward J.]

looking for the part numbers for the current gm door hinge pins and bushings for my 63 conv.. Thanks for your help Ed.

[Joe L.]

Re: Door hinge pins and bushings parts no. help

looking for the part numbers for the current gm door hinge pins and bushings for my 63 conv.. Thanks for your help Ed.

Ed----


The bushings are GM #9721917. There are no pins currently available from GM for your application.

[Randy S.]

Re: Door hinge pins and bushings parts no. help

Ed----


The bushings are GM #9721917. There are no pins currently available from GM for your application.

Joe,

I just got a quote for my 66 the other day from my local dealer. the pins are 20046147 listed as years 73-82. I suspect these are the correct diameter pins but longer than original and have to be cut. So I have read in the archives as I am planning on doing this.

Randy

[Joe L.]

Re: Door hinge pins and bushings parts no. help

Joe,

I just got a quote for my 66 the other day from my local dealer. the pins are 20046147 listed as years 73-82. I suspect these are the correct diameter pins but longer than original and have to be cut. So I have read in the archives as I am planning on doing this.

Randy

Randy------



The GM #20046147 may work for C2's but they were never cataloged by GM for that application. Even for C3 applications they are considerably longer than the original pins and must be cut to proper length. Whether, or not, that's the only problem for C2 applications I do not know.

[Randy S.]

Re: Door hinge pins and bushings parts no. help

Ed----


The bushings are GM #9721917. There are no pins currently available from GM for your application.

Are these bushings smooth or knurled, I found some online but there is no part number reference.

Randy

[Edward J.]

Re: Door hinge pins and bushings parts no. help

Randy------



The GM #20046147 may work for C2's but they were never cataloged by GM for that application. Even for C3 applications they are considerably longer than the original pins and must be cut to proper length. Whether, or not, that's the only problem for C2 applications I do not know.

Joe, the C3 pins are what I was thinking, I can cut them down and make the same length.

[Larry H.]

Re: Door hinge pins and bushings parts no. help

Randy,
#9721917 bushings are smooth.
Larry #24649