Vent window removal - NCRS Discussion Boards

Vent window removal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Roger K.
    Infrequent User
    • November 17, 2008
    • 6

    Vent window removal

    How do I remove the driver side vent glass window without breaking or damaging it?

    I need to have the vent frame spot welded with a new pivot and I am being told the glass needs to be removed and the entire vent window frame and support removed from the car to accomplish it.
  • Rich P.
    Expired
    • January 12, 2009
    • 1361

    #2
    Re: Vent window removal

    Heat the stainless up with a heat gun. This softens the byutel tape and then catch the edge of the stainless on the end of a table and pull the glass out. Wear gloves as you need to heat the stainless pretty good to soften the glue. Take your time and you wont bend the frame.

    Rich

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"