58 Bezels - NCRS Discussion Boards

58 Bezels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brad H.
    Expired
    • August 12, 2007
    • 724

    58 Bezels

    Do the trunk and hood ornaments, ( Bezels?) have the black rubber gaskets underneath for judging? Thanks, Brad.
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: 58 Bezels

    Originally posted by Brad Hake (47659)
    Do the trunk and hood ornaments, ( Bezels?) have the black rubber gaskets underneath for judging? Thanks, Brad.
    Brad -

    Do they show in the Assembly Manual illustrations?

    Comment

    • Brad H.
      Expired
      • August 12, 2007
      • 724

      #3
      Re: 58 Bezels

      John, the aim shows lots of stuff that get's overlooked and vice versa, venders show gaskets as well as the aim I believe, I want a yes or no from someone who has had their car judged with them on and what was the result, simple. Thanks again, Brad.

      Comment

      • Frank P.
        Frequent User
        • April 1, 1985
        • 64

        #4
        Re: 58 Bezels

        Brad:

        No gaskets

        Frank

        Comment

        • Brad H.
          Expired
          • August 12, 2007
          • 724

          #5
          Re: 58 Bezels

          Frank, thank you, am I, (all of us) seeing the gaskets on the aim as well as the vendor photos ( I'm sure ther the same) so why are they not supposed to be on the car's? Thanks again. Brad.

          Comment

          • Bill M.
            Extremely Frequent Poster
            • April 1, 1977
            • 1386

            #6
            Re: 58 Bezels

            Originally posted by Brad Hake (47659)
            Frank, thank you, am I, (all of us) seeing the gaskets on the aim as well as the vendor photos ( I'm sure ther the same) so why are they not supposed to be on the car's? Thanks again. Brad.
            Brad:

            I have the original emblems from my '59 and they had gaskets as delivered. I see they're not mentioned in the JG, but a knowledgeable judge may ding you if you don't have them. If you get dinged for having them, drag out the AIM.

            I'm assuming they are there to prevent water from getting into the trunk; not sure about the front, but it had a gasket too.

            Bill

            Comment

            • Brad H.
              Expired
              • August 12, 2007
              • 724

              #7
              Re: 58 Bezels

              Bill, Thanks again, just as we expected, if it's in the book, that is what should be checked and not what one thought is to be judged. I Will leave mine on. Brad.

              Comment

              • Richard M.
                Super Moderator
                • August 31, 1988
                • 11322

                #8
                Re: 58 Bezels

                I have a 59. Just to clarify location, the seal, AIM E 3.00(rear) & 11.100(front), part# 3753163 seals the emblem at the backside/inside of the fiberglass panel on both front and rear. It is between the emblem outer rim and the FG, not the chrome bezel. You should not see the seal from the outside of the car.

                In '08 I had my car judged, had them installed as described, and had no deducts........other than a 'condition' hit for the original rear emblem.

                What you can get hit for is the incorrect fastening nuts. They should be a green color with 2 tangs for the installation tool. Not pal nuts or push nuts or machine nuts.

                Rich

                Comment

                • Brad H.
                  Expired
                  • August 12, 2007
                  • 724

                  #9
                  Re: 58 Bezels

                  Thanks again Rich for the reply. Brad.

                  Comment

                  Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"