70 wiper door moulding screw

[Bill L.]

Does anyone have or know where I can procure the two small screws that hold the wiper door moulding on the wiper door at both ends?

I bagged and labeled them and now I cannot find them

There are no slots. They are just rounded with grooves. They are just a pressure fit.


Thanks,



Bill

[Dick W.]

Re: 70 wiper door moulding screw

The are called easy drive nails? available from McMaster Carr .http://www.mcmaster.com/#nails/=8nwj88 but don't ask me what size....

[Graeme B.]

Re: 70 wiper door moulding screw

Hi Bill, they are called drive pins.A good industrial hardware should have them (fastener supplier). They come in many different size,the pins that is.
Cheers, Graeme.

[Bill L.]

Re: 70 wiper door moulding screw

You guys are amazing. Found the correct type. Now I just have to determine the correct size. I brought home the smallest they have and it is a little too big.

Maybe 00. I am pretty sure I got the 0 locally.


Bill

[Terry M.]

Re: 70 wiper door moulding screw

Bill,

I know McMaster Carr has them, but you will have to know the correct size and then you will have to buy enough for all of us. You might get close on the diameter using a drill bit, or better yet a set of carburetor pin gauges (everyone has a set of those, right? ) in the existing hole. McMaster Carr has a most excellent on-line catalog to give you some idea of what is available. You just might be able to get them in stainless steel to even satisfy Joe (Mr. Stainless) Lucia.

http://www.mcmaster.com/#drive-nails/=8ogjlh

Also do not overlook Fastenal, although I have no personal experience with them:

http://www.fastenal.com/web/home.ex