63-5 Oil filler cap
Collapse
X
-
Re: 63-5 Oil filler cap
I love those early 63 FI's. No chrome except for the flag. See you soon. JD- Top
Comment
-
Re: 63-5 Oil filler cap
I have put a nice dimple in a ton of those old caps. But recently I got in trouble and ruined an original cap with very good chrome on it. I taped the area of the dimple real nice. Found the center. Took nice punch with masking tape on the end. Put the cap on a piece of oak and gave it a smack. Then the chrome peeled off. You'll have that. Now the chrome shop will buff off the dimple.- Top
Comment
-
Re: 63-5 Oil filler cap
63 327/340 hp - Did the original oil cap 3828373, have a cork disk type gasket or a rubber ring gasket. My cap had a rubber ring type gasket that needs replacing. I realize that cap itself might not be original or correct but is a separate issue TBD.67 427/400 Lynndale Blue Corvette https://online.flippingbook.com/view/750924569- Top
Comment
-
Re: 63-5 Oil filler cap
Originals had a cork gasket. However, some were a disc type (that covered the entire underside of the cap) and some had a round hole in the center. I do not know when the change occurred.In Appreciation of John Hinckley- Top
Comment
-
-
Re: 63-5 Oil filler cap
Duke------
GM #3723588. Discontinued without supersession May, 1991.In Appreciation of John Hinckley- Top
Comment
Comment