Which screw is this? - NCRS Discussion Boards

Which screw is this?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chris E.
    Extremely Frequent Poster
    • November 2, 2006
    • 1322

    Which screw is this?

    I'm missing a screw (both driver and passenger side) on this bracket for the convertible top. I looked at both Paragon and Long Island. I'm still not clear on what screw I need to order.

    Thoughts?

    Chris Enstrom
    North Central Chapter Judging Chairman
    1967 Rally Red convertible, 327/350, 4 speed, Duntov @ Hampton in 2013, Founders @ KC in 2014, family owned since 1973
    2011 Z06, red/red
  • William C.
    Expired
    • July 15, 2009
    • 239

    #2
    Re: Which screw is this?

    Chris..The weatherstrip should have a tap on it that this screw holds. Search "convertible top rear bow" By Bill Trinka and you should get your answer..Bill

    Comment

    • Alan D.
      Extremely Frequent Poster
      • December 31, 2004
      • 2025

      #3
      Re: Which screw is this?

      Here is an original Mar64 - it may help if no changes made to the area.
      Appears to be a piece of metal from gasket.
      Attached Files

      Comment

      • Michael D.
        Very Frequent User
        • January 31, 1978
        • 159

        #4
        Re: Which screw is this?

        Chris
        It looks like you are missing a piece of weatherstrip that has the tab which the screw goes through. It is small pan head screw/ phillips/ about a # 4 or #6 X3/8 inch

        Comment

        • John H.
          Beyond Control Poster
          • November 30, 1997
          • 16513

          #5
          Re: Which screw is this?

          Chris -

          The molded filler piece that forms the front of the top frame lower side weatherstrip has a molded-in steel reinforcement with two tabs for the attaching screws; you appear to be missing those filler pieces. See photo below.
          Attached Files

          Comment

          • Chris E.
            Extremely Frequent Poster
            • November 2, 2006
            • 1322

            #6
            Re: Which screw is this?

            Yup, I just put two and two together and figured that out. I knew that I had yet to install those rubber pieces. I haven't yet because I didn't want them scraping on the paint on the top of the door.

            Thanks guys.
            Chris Enstrom
            North Central Chapter Judging Chairman
            1967 Rally Red convertible, 327/350, 4 speed, Duntov @ Hampton in 2013, Founders @ KC in 2014, family owned since 1973
            2011 Z06, red/red

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"