1967 Glove Box Contents

[Rick S.]

Re: 1967 Glove Box Contents

photos of drawstring bag 63-67 lic #02-04z and key envelope 67 only lic 02-04y

Kim,
What was the drawstring bag used for? Another item that I am not familiar with.

[Brian M.]

Re: 1967 Glove Box Contents

Will report my findings in Old Town.

I believe the page Jim submitted to me was a loose insert; my 2 are bound into the manual, as is John's. The problem brought up by Rick & John points out are that none are dated and all are 4TH Edition. Going forward, dates need to be assigned to all revisions to avoid this confusion.

Thanks everyone for your input.

I understand Brian Mchale is undertaking a survey to locate all original envelopes from one-plate states in 1967 and report his findings to us...

[John H.]

Re: 1967 Glove Box Contents

What was the drawstring bag used for? Another item that I am not familiar with.

The cloth drawstring bag was supplied only on cars with a hardtop - it contained the hardtop wrench and the two rubber sealing washers for the rear hold-down bolts.

[Dave S.]

Re: 1967 Glove Box Contents

photos of drawstring bag 63-67 lic #02-04z and key envelope 67 only lic 02-04y

That is the same reproduction cloth bag that the shark owners use for the seat shims as well. Not very close to an original shim bag but better than nothing. The mid year wrench bags are larger than this as well. I think you will have a tough time fitting a Vlchek W1416 wrench into this bag.