63 wiper motor test?

[Jim R.]

Can anyone tell me a easy way to bypass the switch and direct wire the wiper motor ,the engine is out so there is plenty of room to get at the wiper motor now ,and i would like to see if it operates....jim

[Roger O.]

Re: 63 wiper motor test?

At the 3 terminals apply 12v to the center brown wire terminal, ground the yellow wire terminal and it should run on high,grounding the other terminal while the yellow is still grounded the motor should run on low.

[Jim R.]

Re: 63 wiper motor test?

Thanks roger.

[Gary H.]

Re: 63 wiper motor test?

Roger, does that test work for all midyear wiper motors??? Thanks, Gary

[Roger O.]

Re: 63 wiper motor test?

Roger, does that test work for all midyear wiper motors??? Thanks, Gary

Yes power in the center ,grounding both outer spades motor will run on low, drop the ground from the green and the motor should run on high.

[Joe R.]

Re: 63 wiper motor test?

Just a small note! The case of the WW motor must be grounded. I'm sure it was assumed you knew that! And probably did!

JR

[Roger O.]

Re: 63 wiper motor test?

Just a small note! The case of the WW motor must be grounded. I'm sure it was assumed you knew that! And probably did!

JR

Your absolutely right,sorry I didn't mention the ground,its just as important as the power in.