1957 park brake signal switch

[Dan P.]

are there two styles of park brake signal switches notice bracket is on the other side on switch on right

[David V.]

Re: 1957 park brake signal switch

Hey Dan Is it possible to "disassemble" the pass. bracket/switch & "reassemble" it so it will look/resemble the Vette bracket/switch?

[Dan P.]

Re: 1957 park brake signal switch

no it is offset to the wrong side . This must be a passenger car . It is not A 55-64 maybe A 49-54

[David V.]

Re: 1957 park brake signal switch

Hey Dan or anybody: I bought a park light jewel off ebay that does not have the bulb "socket." Can you recommend a substitute bulb socket that will work?

[Dan P.]

Re: 1957 park brake signal switch

1955 1956 passenger car and I think 55-59 trucks are the same

[Troy P.]

Re: 1957 park brake signal switch

Huh? Passenger car did not have the brake jewel. Which part on the cars were you thinking of that would provide the correct socket?

[Dan P.]

Re: 1957 park brake signal switch

it is A accessory . there is one on Ebay right now

[David V.]

Re: 1957 park brake signal switch

Huh? Passenger car did not have the brake jewel. Which part on the cars were you thinking of that would provide the correct socket?

57 Pass. cars did have a parking brake jewel that mounted on a sep. bracket that mounted under the dash. I was hoping to find a late model socket at a local parts store that could be used instead of the original socket that went with the jewel.

[Bruce B.]

Re: 1957 park brake signal switch

Dan,
When I finally got around to installing the e-brake warning light I ran into the same problem with the bracket.
With it installed the emergency brake can not be released as the small stop piece hits the bracket.
Oh well, no e-brake warning light.
Bruce B