67 trailing arms

[Lawrence S.]

Is there a way to tell small block from big block trailing arms on a 67, or are they the same?

Thanks,

[Rich P.]

Re: 67 trailing arms

Original from the factory 67 BB rear trailing arms had 2 holes on either side of the upper spring bolt hole to mount the sway bar bracket.

Rich

[Tom D.]

Re: 67 trailing arms

Search archives for comments about those holes. Should be more there.

Tom

[John H.]

Re: 67 trailing arms

As received at St. Louis, there was only one pair of trailing arm assemblies; if the car was a big-block, the two holes for the stabilizer bar mount bolts were added in an off-line bench drill fixture adjacent to the Frame Line.