I had a 67 & a 70 Corvette that the seat belts were froze up because of rust. The cars are drivers & I just wanted lap belts that would adjust. The 70 was easy I used a screwdriver & pooped the cover off & wire brushed the rust off. The 67 was harder because there was no easy way to get the latch apart. I squirted Kroil & let it soak. I kept working the webbing till it broke lose. Both belts would adjust but it was still very hard to do. I sprayed 100% silicone spray on the serrated adjuster rod & they worked better than new. Its a cheap fix.
KEN
KEN
Comment