67 tele turn signal harness routing

[Thomas R.]

Did a search and came up empty. Trying to find out proper routing for turn signal harness for 67 tele and also where the the escutcheon(on main harness) with clip is suppose to attach

Thanks in advance.

[Stephen L.]

Re: 67 tele turn signal harness routing

Routing and clip location are shown in your Aim.

[Gerard F.]

Re: 67 tele turn signal harness routing

Thomas,

I think the routing is the same as on the standard column. Shown on AIM sheet UPC12 B3.

The signal switch wiring harness goes down the bottom of the steering column through and past the instrument cluster, then goes to the passenger side of the steering column and over the top of it, to the body harness connector.

The body harness connector clips onto the horizontal portion of a brace above the steering column.

It is really confusing the way it clips on the brace. The curvature of the connector is opposite curvature of the steering column.

[Thomas R.]

Re: 67 tele turn signal harness routing

Thanks Gerard!