Does anyone know what the wire clip looks like and where it is attached for the TCS wire that goes to the TCS switch on a manual trans? Tx in advance.
70 Tcs
Collapse
X
-
Re: 70 Tcs
Try UPC 7, sheet B6 of the assembly manual, clip mounts off the top dr side trans to bellhousing bolt.Bill Clupper #618- Top
-
Re: 70 Tcs
...And to my knowledge, nobody reproduces that little clip. It's like a little spark plug wire boot, a little black round boot on the end of a black wire if I remember. I know I searched wiring harnesses and repro outfits.....never did find one. You can still get the jumper wire that goes from the sending unit to the relay repro, but that's it as far as I know.....- Top
Comment
-
Re: 70 Tcs
Actually it was a molded-on part, never available as an individual item as it was not "assembled" but actually molded over the wire and terminal assembly.Bill Clupper #618- Top
Comment
-
Re: 70 Tcs
Chevelle, GTO and others used similar parts. I'd try some of the major wiring harness reproduction outfits and see if anyone has tooled up the mold and could supply you with a pigtail you could splice into your existing harness.Bill Clupper #618- Top
Comment
Comment