62 master cylinder

[Jim H.]

Can someone tell me if this is the correct mc for a 62? It has EIS on the side of it. I am thinking it was a replacement.

[Mike E.]

Re: 62 master cylinder

EIS is an aftermarket supplier. Delco was the original supplier.

[Jim H.]

Re: 62 master cylinder

EIS is an aftermarket supplier. Delco was the original supplier.

Okay, thanks...

[Richard T.]

Re: 62 master cylinder

Jim,
The casting number "5456022" is located on the outboard side of the cylinder and the last three numbers(022) are much larger than the rest. Also there is a welch plug pressed into the front of the housing and the part number "5454480" and 320-G are stamped into it. Rich

[John F.]

Re: 62 master cylinder

See attached photos of 62 master cylinder. Best I could do tonight.

[John F.]

Re: 62 master cylinder

Having trouble with photos. Hope this helps.