The wiper switch I removed from the pod is a small rectangular unit with two electrical clips protruding from the bottom. The shaft that goes through the pod opening is threaded at the end and moves in and out. Am I correct in assuming that this is the proper unit for a nonwasher system? This washer switch is obviously completely different from the washer switch with cables. If correct, does the knob screw-on to the shaft? Thanks.
-
-
Re: C1 Wiper Switch
It is difficult to provide an answer without knowing what year you are referring to. -
Re: C1 Wiper Switch
I believe that on all C1s the wiper knob is fastened to the shaft with a slotted set screw.
There are no electrical connections on the wiper switch under the dash. The switch is in the wiper motor assembly.
Bruce B.Comment
-
Re: C1 Wiper Switch
I determined the switch was not original. Thanks.Comment
Comment