clock

[Sal R.]

I have a 65 and the clock does not work,does any one out there know where I can sent it for repair.
Thank You
Sal R

[Harry S.]

Re: clock

Sal, there are many places and everyone has their favorite. Try Joe Ray, just let him know if you want just mechanical or mechanical and cosmetic. He is a long time member and can be reached at:

http://joerayparts.com/

Harry

[Sal R.]

Re: clock

Thank you so much Harry

[John F.]

Re: clock

I used clockwks.com. Outstanding service & good turnaround time. John

[David D.]

Re: clock

I have a 65 and the clock does not work,does any one out there know where I can sent it for repair.
Thank You
Sal R

I used Harrison Speedometer and it turned out fantastic. Reasonably priced and Bill was great to work with. gldnkngt@comcast.net. www.harrisonspeedometer.com 561-676-3099.

David

[Anthony G.]

Re: clock

Does anybody know of a way to bench test a C2 clock to make sure the problem is the clock and not the wiring?

[Stephen L.]

Re: clock

Connect the clock to a 12vdc battery, and let it run for awhile to see if it'll continue after a few days. Many times they run for a few "wind cycles" then quit.

Connect the pole on the rear of the clock to + and the case to -.

These clocks are mechanical, and are wound every few minutes by the battery. Typically the "electrical contacts" in the winding circuit are burned/corroded causing the clock to not wind.

[Anthony G.]

Re: clock

Thanks Steve. I'll give it a shot. Appreciate the quick response.

Tony

[William D.]

Re: clock

I used D & M restorations in Greenville,SC for my 65 clock. Fast turn around clock works great.

Bill

[Stephen L.]

Re: clock

I also used D&M in Greenville. Just happens that I also live in the Greenville area and have been to their shop. They do instrument repair on many types of cars.. Corvette being one of them. They do a lot of work on vintage classics. Their work is excellent.

Steve