Strap Identification

[Joe P.]

I found these straps in a box and have no idea where they belong..

My guess is they have something to do the soft top?

Any help appreciated..

[Jack H.]

Re: Strap Identification

A set of reproduction rear deck lid tabs?

[Joe P.]

Re: Strap Identification

Did some more digging... Found it..

Convertible top frame hold down compression strap kit, 8 1/2" long, Black. These straps hold the top frame together tightly when folded down.

Now.. where are they attached? Any pictures would be welcomed..

THanks..

[Joe P.]

Re: Strap Identification

A set of reproduction rear deck lid tabs?

is this what you mean?

[Richard T.]

Re: Strap Identification

Joe,
Regarding the black "footman Straps", The end with the male snap that has a screw running through it will screw into the rear bow, you should find a hole on the inside of the bow just after the curve. The other end with the female snap should snap over a male snap mounted on the soft top frame just behind the rear edge of the side window. The ST-12 shows how they're used. I hope that I made it clear but if not check out the ST-12. Rich

[Joe P.]

Re: Strap Identification

Joe,
Regarding the black "footman Straps", The end with the male snap that has a screw running through it will screw into the rear bow, you should find a hole on the inside of the bow just after the curve. The other end with the female snap should snap over a male snap mounted on the soft top frame just behind the rear edge of the side window. The ST-12 shows how they're used. I hope that I made it clear but if not check out the ST-12. Rich

Perfectly clear.. thanks..

I couldn't find anythng in the assembly manual, and my ST-12 was ordered last week and is on its way now.. I will be glad when it arrives.

Joe

[Rob M.]

Re: Strap Identification

Here it is:

This is how it is attached:

This is where it snaps into:

[Joe P.]

Re: Strap Identification

Rob, thanks again..

Joe.