C2 Tie rod Clamp Orientation

[Joseph T.]

I am having one of those moments. Can someone post a picture of both clamps Orientation on the tie rod sleeves. Or even a detailed explanation of Which way the clamps and the bolt heads face on both ends? I can not seem to find it in the 67 assembly manual. Thank you in advance

[John H.]

Re: C2 Tie rod Clamp Orientation

See UPC 9, Sheet 2, Views "A" and "B".

[Jim S.]

Re: C2 Tie rod Clamp Orientation

I can't tell you if the 1975 Corvette tie rods and clamps are the same as the C2 but they might be. This paper explains all about clamps and adjusters with respect to the AIM sheets.

http://jimshea.corvettefaq.com/wp-content/uploads/2007/03/steeringlinkagetierodspecs-rev01mr07.doc

Hope that it helps,
Jim Shea

[Joe L.]

Re: C2 Tie rod Clamp Orientation

I can't tell you if the 1975 Corvette tie rods and clamps are the same as the C2 but they might be. This paper explains all about clamps and adjusters with respect to the AIM sheets.

http://jimshea.corvettefaq.com/wp-content/uploads/2007/03/steeringlinkagetierodspecs-rev01mr07.doc

Hope that it helps,
Jim Shea

Jim-----


The C2 tie rods and tie rod sleeves were exactly the same as C3. The C2 tie rod sleeve clamps were slightly different in configuration than C3 but are functionally identical and 100% interchangeable.