Info Needed Re 1970-74 Big Block

[Joe L.]

Re: Info Needed Re 1970-74 Big Block

Joe,

In the two photos there are five (5) sockets, the clearance measurements of each socket from front to rear are as follows; 31/32", 1-3/16", 1-1/8", 1-1/16", 7/8". Note: the last socket measurement is up against the exhaust clamp and the first one is up against the front portion of the footwell that protrudes. Between this narrative and the photos, I hope you find it helpful. If you need anything else just let me know.

Ray

P.S. My first attempt at including photos...hope they come through ok.

Ray-----


I've sent an e-mail to you. Your photos came through PERFECT as an attachment to your e-mail. They are EXACTLY what I needed. Thank you VERY, VERY much. They provided me with the EXACT information I am looking for.

[Kevin M.]

Re: Info Needed Re 1970-74 Big Block

Joe,

Post em if your allowed, you git me curious.

Kevin

[Joe L.]

Re: Info Needed Re 1970-74 Big Block

Joe,

Post em if your allowed, you git me curious.

Kevin

Kevin-----


Well, let's see if I can make this work. However, full credit for the photos goes to Ray Wells. They're his photos and his car.

[Raymond W.]

Re: Info Needed Re 1970-74 Big Block

Joe,

Update on the email side bar...got the alarm horn to work tonight at full/correct sound. One can only hope that the WD-40 penetrated the membrane enough so that it'll continue to work for the Operations Judge tomorrow...about 15 hours from now.

Ray