1968 Wiper Issue - NCRS Discussion Boards

1968 Wiper Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Daniel P.
    Infrequent User
    • January 12, 2020
    • 3

    1968 Wiper Issue

    I cannot get my wipers to work on my '68. I started by checking the fuse and blower motor ground; then the override switch and door limit switch; then the relay and the motor; all checked okay. I found a loose ground connection for the override and door solenoid: started working but the washer pump stays on. shut them and now they don't work again. I have tried grounding each component separately too. I had a Corvette shop back in the 70s and have fixed these issues.
  • Mark E.
    Extremely Frequent Poster
    • April 1, 1993
    • 4542

    #2
    How specifically does it not work? Does the door open and close using the wiper switch and the over-ride pull knob?
    Mark Edmondson
    Dallas, Texas
    Texas Chapter

    1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
    1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

    Comment

    • Daniel P.
      Infrequent User
      • January 12, 2020
      • 3

      #3
      Right now I have the door manually open. I even checked the negative battery cable to frame connection; ground to block and; ground to starter connections (everything is ground driven on a '68). originally before I found the ground issues on the override bracket under the column, that to lead to a brief operation of the wipers, I would hear a click at the motor. Now I hear nothing.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"