1956 Clutch Fork - NCRS Discussion Boards

1956 Clutch Fork

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sheldon S.
    Very Frequent User
    • March 1, 1999
    • 475

    1956 Clutch Fork

    I am trying to identify which fork to use on my 56 . I had put one in but have now realized the curved part is way too much and have another one I think will work. I have pictures but can't figure out how to upload the pic. Is there some way to visually figure out what should be used. I have 3 different ones, two are the style that are used in the late 56 through 62 with the pin that goes through the end of it into the adjusting rod. The other one has a hole in the end for the style that was used early 56.
    Any info greatly appreciated.

    Sheldon
  • David B.
    Very Frequent User
    • March 1, 1980
    • 689

    #2
    Look in a '57 parts book under Grp. 0.795 There is a 1955-57 clutch pedal illustration etc. also will give correct part numbers and description for what your looking for.

    Comment

    • Joseph L.
      Very Frequent User
      • July 26, 2012
      • 162

      #3
      Hi Sheldon
      Look in the JM for the clutch fork configuration. It has to match with the 1956 pushrod end. I am assuming you want a typical fork.

      Joe
      Attached Files

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"