Early '63 installed upper A-arm ball joint rivet question - NCRS Discussion Boards

Early '63 installed upper A-arm ball joint rivet question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jack H.
    Very Frequent User
    • October 31, 1998
    • 138

    Early '63 installed upper A-arm ball joint rivet question

    Does anyone know the outside diameter of the rivet and thickness of the rivet head after being installed? (As seen on the bottom of the A-arm) Wanting to match installed rivet as close as possible to the rivet showned in the attached picture or does it matter for judging? Picture is from an early '63. Have not found anything in the manual or board.

    DSC04941.JPGThanks for any help or thoughts on this...Jack
  • Joseph S.
    National Judging Chairman
    • February 28, 1985
    • 826

    #2
    Re: Early '63 installed upper A-arm ball joint rivet question

    The rivets supplied with the Ball Joints work just fine for judging.

    Comment

    • Jack H.
      Very Frequent User
      • October 31, 1998
      • 138

      #3
      Re: Early '63 installed upper A-arm ball joint rivet question

      Thank you Joseph that will save me some time & head scratching

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"