Can someone explain or send me to a site that would identify this unit
-
-
Re: 1962 oil pressure sending unit
Roger,
Not exactly sure what you're asking about. There is no such thing as an oil pressure sending unit. There is a copper plated steel line that runs from the engine block to the back of the oil pressure gauge...that's it.Leif
'67 Coupe L79, M21, C60, N14, N40, J50, A31, U69, A01, QB1
Top Flight 2017 Lone Star Regional -
Re: 1962 oil pressure sending unit
Roger, I am attaching pictures of what Leif is explaining. If stock, you should have a hard line that is approximately 1/8 inch in diameter that connects directly to the engine block near the distributor then runs through a grommet in the firewall and then to the oil pressure gauge. Hope this helps, Frank
IMG-4694.jpgIMG-4692.jpgIMG-4691.jpgIMG-4689.jpgIMG-4683.jpgFrank Clark
U.S. Army Retired, current serving DoD Civilian
C1 1962 300hp, 4spd. Black/Fawn
C2 1966 Coupe, L79, A01, C60, J50, M21, N40. Silver/Black
C20 1966 Custom Camper, L30, J70, M49, N40, G60, Saddle/White
C20 1966 Custom Camper, L30, M49, N40, G60, Saddle/White
Comment
-
Re: 1962 oil pressure sending unit
oil press sendinguins were used on chevy pass cars of the late 0s and on. no c-1 or c-2 vets used electric sending units. mike mccaghComment
Comment