Fuel Pump for 1961

[Joseph F.]

Looking for a rebuilt pump, does not have to meet NCRS identification standards. Looking for a rebuilder who can rebuild my current pump. Any recommendations for aftermarket fuel pumps.

[Leif A.]

Re: Fuel Pump for 1961

Rock Auto sells a Carter aftermarket replacement.

https://www.rockauto.com/en/moreinfo.php?pk=295986&cc=1325449&pt=6256&jsn=1003

[Gary B.]

Re: Fuel Pump for 1961

Looking for a rebuilt pump, does not have to meet NCRS identification standards. Looking for a rebuilder who can rebuild my current pump. Any recommendations for aftermarket fuel pumps.

Fred Ballard
28916 Flowerpark Drive
Canyon Country, Ca. 91387-1801
661-251-2362
fredsclassics@hotmail.com

[Mike M.]

Re: Fuel Pump for 1961

oprginal 61 fuel pumps weren't crimped but rather easily disassembled and new guts inserted. 1'2 hour job at best. if you have the original AC 61 pump, i'd rebuild it with new internals. mike

[Mike E.]

Re: Fuel Pump for 1961

oprginal 61 fuel pumps weren't crimped but rather easily disassembled and new guts inserted. 1'2 hour job at best. if you have the original AC 61 pump, i'd rebuild it with new internals. mike

[Joseph F.]

Re: Fuel Pump for 1961

Mike - I have a pump (not original) that needs some work. Would like to talk to you about rebuilding. Please contact me at jfeko@wowway.com
Thanks.

[Joseph F.]

Re: Fuel Pump for 1961

Gary,
Do your have contact information for Arthur Gould?
Joe

[Joseph F.]

Re: Fuel Pump for 1961

Any thoughts on Carter M6900 pump? Inlet and outlet ports look like they can be reoriented to meet the positions I need although positions may not be exact.
Joe

[John D.]

Re: Fuel Pump for 1961

Joseph,Here's a mistake that I see on rebuilt pumps. The kits come with a new Pin and C clips that hold the "blades" in place. The actuator blades.
I don't know the correct name for these blades. Not necessary to do this. Leave the original pin in place.
Buy a rebuilt kit that's for ethanol for your 4656 pump.

[Mike M.]

Re: Fuel Pump for 1961

agree with john. i never remove the original pivot pin. besides if u do, the judges will catch the c-clip. mike

[Gary B.]

Re: Fuel Pump for 1961

Joe,

Here you go. Website: http://www.arthurgouldrebuilders.com/

Arthur Gould Rebuilders

789 Wachusett St.
Holden, MA 01520
United States
Phone: 508-210-0891

Gary

[Joseph F.]

Re: Fuel Pump for 1961

Thanks to all who replied. Still looking for a pump or rebuild kit. Also, is there any thing to do to prolong pump life while in winter storage?