radio - NCRS Discussion Boards

radio

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mel S.
    Very Frequent User
    • August 31, 1992
    • 263

    radio

    How do you remove the radio in my 66 with factory air?
    Thanks
    Mel
  • Don H.
    Extremely Frequent Poster
    • November 30, 1981
    • 1482

    #2
    Re: radio

    Mel, Here is the "rough draft" as it has been a few years since I did it. Remove both console side panels (easier if you remove the console). Remove the bottom heater diverter box (probably a bad description), it is the metal box directly behind the radio that comes out fairly easy after you remove a few screws. Disconnect the power connector, antenna, & radio knobs. There are nuts behind both knobs and a bolt on the right (passenger) side. I think you can now work it out. If I remember correctly it ends up on its side to come out. Hopefully someone will correct or add to my procedure as needed. Good luck, Don H.

    Comment

    • Scott S.
      Very Frequent User
      • February 28, 1979
      • 747

      #3
      Re: radio

      Mel, I would first take the side panels off. Then check for a rear brace and undo it. Remove the Knobs on the front and push the radio to the front of the car. it is a tight squeeze.
      Scott

      Comment

      • Jimmy G.
        Very Frequent User
        • October 31, 1979
        • 975

        #4
        Re: radio

        Removing the console helps also
        Founder - Carolinas Chapter NCRS

        Comment

        • Mel S.
          Very Frequent User
          • August 31, 1992
          • 263

          #5
          Re: radio

          Thanks - i did remove the console, side panels, knobs, nuts bezels power connections, antenna and bole on bottom on the on the passenger side. Just could not get the radio out. i will remove the "heater" outlet.
          Thanks
          Mel

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"