1968 Headlights

[Jeff P.]

Low beams come on fine. On high beams the right low beam goes out. I purchased another low,high beam bulb and the same thing happened. Any help here ?

[David M.]

Re: 1968 Headlights

Step 1. Check the forward harness and headlight grounds and all 4 connectors on the bulbs. Look at the spade connectors in the plastic housings. Should be clean and tight for all the above items. Get the diagram if you dont have one.
Step 2. Check for voltage at each connector when the bulb should be on.

[Jeff P.]

Re: 1968 Headlights

Thank you David. I do have a schematic for the headlamps. The wire of concern is tan.