Mystery about replacement engine harness

[Gary J.]

Re: Mystery about replacement engine harness

Also I believe in post #13 the brown wire on the right hand side plugs into the fan motor switch. The pig tail connector off of that same wire plugs into the capacitor that is located at the bottom of the instrument cluster near the ignition switch if it is still present.

[John P.]

Re: Mystery about replacement engine harness

i see What would be best access approach for these plugins? pull radio etc? I have been under dash a lot-but never had to pull instrument cluster. I see it isn't a popular activity.

[Gary J.]

[John P.]

Re: Mystery about replacement engine harness

Using AIM (awaiting DR Rebuild diagram), with input from all, its appearing more clear.

PM sent for you Robert.

Thanks to all.

[Greg H.]

Re: Mystery about replacement engine harness

Hi John,
I found this in my library of AC data. I think your Y connector is found on page 16.
Good Luck.

The NCRS will not let me post this document. Do a search for "Mid-Year Corvette non-cluster dash connectors Riv 5-11-16"

Greg

[John P.]

Re: Mystery about replacement engine harness

would this be a search in the archives here?

[Greg H.]

Re: Mystery about replacement engine harness

I took my advice and did not find it here in the NCRS info.

BINGO try this

http://www.ncrsmac.org/garage/Mid-Year%20Corvette%20%27Non-Cluster%27%20Dash%20Connections%20Zuberer-Welsh%20%205-19-16%20FINAL%20-%20mod.pdf

[Gary B.]

Re: Mystery about replacement engine harness

Kudos to Dave Zuberer and Tim Welsh. That document is a masterpiece.

Gary

[John P.]

Re: Mystery about replacement engine harness

And thumbs up on the Doc Rebuild wiring charts, which arrived today. Excellent advice on this purchase.