67 427 Fan Shroud

[Jeff B.]

For 1967 w/427 engine, is the fan shroud different for an A/C car to a non-A/C car?

[Leif A.]

Re: 67 427 Fan Shroud

Jeff,
The fan shroud was the same for both the non A/C car and the A/C car. The A/C car had a lower extension added. See attached.

https://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000370a~Z5Z5Z5AADQO~P110.00~~~~S5A10VVLI810720612114a~Z5Z5Z5~Z5Z5Z50000370a

[Jeff B.]

Re: 67 427 Fan Shroud

Thanks Leif:
I've noticed on my car the shroud seems to be in two pieces, an upper "half" and lower half, riveted together on each side. Is it possible to get a one piece shroud, or does one get the two halves and rivet them together? If only the upper half is needed, can that piece be sourced and then riveted to an original lower half? Are you saying that a non-A/C car simply did not even have this lower "half"?

[Domenic T.]

Re: 67 427 Fan Shroud

Jeff,
I think what Leif is saying is that they both had the upper and lower. The difference is that the AC shroud has an additional 3rd piece on the lower part.
I bought that piece when I added factory air on my 427.

Dom

[Keith B.]

Re: 67 427 Fan Shroud

yes there is third piece that is bolted to the lower half. and the lower part has the square "J" clips

[Leif A.]

Re: 67 427 Fan Shroud

Jeff,
I think what Leif is saying is that they both had the upper and lower. The difference is that the AC shroud has an additional 3rd piece on the lower part.
I bought that piece when I added factory air on my 427.

Dom

Exactly...thanks for clarifying my earlier statement Dom.

[Jeff B.]

Re: 67 427 Fan Shroud

Thanks to all for their input.