Starting box with TI - NCRS Discussion Boards

Starting box with TI

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Harmon C.
    Extremely Frequent Poster
    • August 31, 1994
    • 3228

    Starting box with TI

    I have a box I made to start the engine in the frame before the body drop that works very good with standard ignition. My question is will it work with a 350 LT-1 with transistor ignition or will I need to add something to make it work.
    Lyle

  • Harmon C.
    Extremely Frequent Poster
    • August 31, 1994
    • 3228

    #2
    Re: Starting box with TI

    45 hits and no reply?
    Lyle

    Comment

    • Gary B.
      Very Frequent User
      • July 31, 1979
      • 926

      #3
      Re: Starting box with TI

      Lyle,
      You will need a TI box, hooked up properly, gounded, thru the ignition switch. Or, put in a points style distributor.
      I have a front half of a frame I use, with a radiator, on wheels. I have a TI box wired in, and just wire it differently for a points distributor.
      Gary B

      Comment

      • Jim D.
        Extremely Frequent Poster
        • June 30, 1985
        • 2883

        #4
        Re: Starting box with TI

        Okay. I have no idea what kind of a "magic box" you have but, no parts of a regular ignition system are interchangeable with T.I. ignition. I recently fired up my 65 BB (with T.I) on the chassis and simply used a spare point type distributor and coil because I didn't want to go through the hassle of all the extra wiring and mounting of the T.I. amplifier.

        Comment

        • Harmon C.
          Extremely Frequent Poster
          • August 31, 1994
          • 3228

          #5
          Re: Starting box with TI

          Thanks I will use a points type distributor for the test.
          Lyle

          Comment

          • Mark G.
            Very Frequent User
            • January 31, 2007
            • 177

            #6
            Re: Starting box with TI

            I think you can use a 4 terminal Delco D1906 HEI module and the t.i. distributor to trigger it. Any point coil will work.

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"