1994 LT1 power steering pulley wobbly

[Jim P.]

My power steering pulley is wobbly and I was looking to replace it. The part is discontinued and I can only find one on ebay for $250. GM Part No. 10227069. Is there any other gm part that will replace this. ANY OTHER IDEAS ON A REPAIR OR REPLACEMENT? This is just a daily driver and it seems my only other option is an aftermarket replacement - Billet Specialties FM1035PC - 6-Groove Power Steering Pulley.

[Kenneth P.]

Re: 1994 LT1 power steering pulley wobbly

Give these two a call. They maybe able to help you out.

http://www.mirrockcorvette.com/

http://www.contemporarycorvette.com/

[Kenneth P.]

Re: 1994 LT1 power steering pulley wobbly

Ok I found this on eBay $99 is better then $249 and you get the pump to. You can make them an offer.

http://www.ebay.com/itm/POWER-STEERING-PUMP-FITS-96-CORVETTE-284959-/302139244563?fits=Model%3ACorvette&hash=item4658e70013:g:IdQAAOSwKOJYKyhC&vxp=mtr

Ken

[Kenneth P.]

Re: 1994 LT1 power steering pulley wobbly

Here is another one I found on eBay. You can see the pulley part number in the pic.

http://www.ebay.com/itm/POWER-STEERING-PUMP-BASE-FITS-84-92-94-95-CORVETTE-260097-/262651305743?fits=Model%3ACorvette&hash=item3d273cdf0f:g:~-IAAOSwux5YLa12&vxp=mtr

Ken

[Jim P.]

Re: 1994 LT1 power steering pulley wobbly

Thanks Ken. I guess I need to improve my search skills. I was able to actually purchase one here in Houston for Carney's Corvette with the pump. His advise was not to pull it from the pump, as that is how it gets bent. So I am reinstalling the new used pulley with the pump hopefully it won't wobble.

Thanks again.

[Kenneth P.]

Re: 1994 LT1 power steering pulley wobbly

Good to hear. I like searching for stuff it keeps my mind sharp.

Ken

[Joe L.]

Re: 1994 LT1 power steering pulley wobbly

Thanks Ken. I guess I need to improve my search skills. I was able to actually purchase one here in Houston for Carney's Corvette with the pump. His advise was not to pull it from the pump, as that is how it gets bent. So I am reinstalling the new used pulley with the pump hopefully it won't wobble.

Thanks again.

Jim------


They get bent only if a proper puller is not used to remove the pulley.

[Keith B.]

Re: 1994 LT1 power steering pulley wobbly

Thanks Ken. I guess I need to improve my search skills. I was able to actually purchase one here in Houston for Carney's Corvette with the pump. His advise was not to pull it from the pump, as that is how it gets bent. So I am reinstalling the new used pulley with the pump hopefully it won't wobble.

Thanks again.

they also get bent when removing the water pump bolt and not watching how fare out your ratchet is moving before it gets to the pulley if you don't go though the one hole. Don't ask me how I know... its been bent for nine years with no ill effects