Finish on original 1967 KH bolt on wheels

[Donald A.]

Re: Finish on original 1967 KH bolt on wheels

Enlighten me. I have seen Irwin screwdrivers that are labled 200-4 and 200-5. Were there different lenghts offered out of the 720?

No, there were not. Judging Guide (5th Edition) clarifies this, stating " The screwdriver is 10-1/2" long with a 5" shaft, a 1-5/16" collar with circumferential indentations, a red wooden handle with six natural wood finish flutes and is imprinted in white on one rib with IRWIN 200-5 and on the next rib with Made in U.S. of A, or imprinted on one rib only with IRWIN USA 200-5 "

Irwin made millions of screwdrivers, the 4" version was never a Corvette item in my opinion. The 4" ones I have seen look just like the correct 5" ones other than the shaft length and the imprint

[Robert M.]

Re: Finish on original 1967 KH bolt on wheels

[ATTACH=CONFIG]64339[/ATTACH][ATTACH=CONFIG]64340[/ATTACH]I have this one available.

Brian
I agree with Don Anderson's later post. The original Irwin screwdriver was labled 200-5" not 200-4"

[Brian M.]

Re: Finish on original 1967 KH bolt on wheels

I agree with Don also.

Brian
I agree with Don Anderson's later post. The original Irwin screwdriver was labled 200-5" not 200-4"

[Robert M.]

Re: Finish on original 1967 KH bolt on wheels

I agree. My verified tank sticker includes N89 and a year ago I located this...

[ATTACH=CONFIG]64295[/ATTACH]

Don, I have my eye out, let me know if you find another otiginal 200-5"

[Robert M.]

Re: Finish on original 1967 KH bolt on wheels

I agree. My verified tank sticker includes N89 and a year ago I located this...

[ATTACH=CONFIG]64295[/ATTACH]

Irwin 1.jpgIrwin 2.jpgIrwin 3.jpg

Is this the REAL DEAL? I just found it!

[Donald A.]

Re: Finish on original 1967 KH bolt on wheels

Well assuming 10-1/2" length, 5" shaft etc photos show the red wooden handle, flutes and the two imprint versions... Irwin and 200-5 and USA would be as good as it gets so there you go

[Brian M.]

Re: Finish on original 1967 KH bolt on wheels

I'd be careful. I'm sure it's not cheap.

[Ara G.]

Re: Finish on original 1967 KH bolt on wheels

Is it my eyes, or are the bottom three pictures he posted all of different screwdrivers? The wording is different on the drivers in each picture. ARA

[Donald A.]

Re: Finish on original 1967 KH bolt on wheels

Is it my eyes, or are the bottom three pictures he posted all of different screwdrivers? The wording is different on the drivers in each picture. ARA

No not your eyes! He posted three different versions. The third photo is a crop of my screwdriver posted earlier in this thread. The other photos show one of the one-rib imprinted versions (IRWIN USA 200-5 all on one line) however that screwdriver is missing the hyphen between the 200 and the 5, not sure how critical that is. The other photo is of a two-rib version but has different font, spacing etc from mine.

[Brian M.]

Re: Finish on original 1967 KH bolt on wheels

How many points are assigned to the screwdriver?

[Michael J.]

Re: Finish on original 1967 KH bolt on wheels

Is it my eyes, or are the bottom three pictures he posted all of different screwdrivers? The wording is different on the drivers in each picture. ARA

Good catch there.

[Robert M.]

Re: Finish on original 1967 KH bolt on wheels

Something is definitely not right here. I am bring offered this screwdriver for $80.00!