Ive been happy ordering frame hardware through Paragon but they do not have the bolt that mounts the white pulley for the parking brake. Does anyone know a vendor who carries the correct bolt. The head marks show it to be a grade 5 with a letter "A". As for the pulley it is fine but is a tad yellowed. When new were they a true white? Thanks.
Looking for a vendor for 67' parking brake pulley and bolt
Collapse
X
-
Tags: None
- Top
-
Re: Looking for a vendor for 67' parking brake pulley and bolt
Chris:
Try Long Island Corvette part # 51-97A (listed as a pair so not sure it is correct - but appears to be---they indicate 2" in length).
OR ---
Zip products has this:
Screen Shot 2015-09-14 at 4.58.10 PM.png
It appears to be the part you need per their drawing... but check it out for yourself --- and --- I assume here that you know you need a spacer as well (if you don't already have one) ---- check out the parts in the '67 AIM UPC Section 5 C1.
I would not worry too much about the yellowing of the pulley --- it probably was white at one time but has discolored a bit. The one on my '67 is closer to white but it is new.
Screen Shot 2015-09-14 at 5.05.09 PM.jpg
Hope this helps a bit ---
Regards
Bill- Top
-
Re: Looking for a vendor for 67' parking brake pulley and bolt
Ive been happy ordering frame hardware through Paragon but they do not have the bolt that mounts the white pulley for the parking brake. Does anyone know a vendor who carries the correct bolt. The head marks show it to be a grade 5 with a letter "A". As for the pulley it is fine but is a tad yellowed. When new were they a true white? Thanks.
Christopher-------
The original pulley was never completely white. It had a very slight yellowish "hue" to it.
The reproduction pulleys are WHITE-WHITE.In Appreciation of John Hinckley- Top
Comment
-
Re: Looking for a vendor for 67' parking brake pulley and bolt
Thanks for the replies, I'll reuse the pulley and spacer. Still looking for the correct bolt. Is the bolt silver zinc plated?- Top
Comment
-
Re: Looking for a vendor for 67' parking brake pulley and bolt
Christopher------
Bolt, nut, and spacer were phosphate-finished.In Appreciation of John Hinckley- Top
Comment
Comment