53-54 Soft Top Flipper Moulding Assembly - NCRS Discussion Boards

53-54 Soft Top Flipper Moulding Assembly

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Eric F.
    Expired
    • June 30, 2003
    • 319

    53-54 Soft Top Flipper Moulding Assembly

    I've purchased new springs to repair the flipper assemblies on an early 54. Unfortunately I can't seem to figure out how to install the springs. I suspect the flippers are missing a piece that retains the springs but I can't determine for sure. I've searched and searched the web but can't find any drawings for photos that show how the springs are attached. Does anyone have a drawing or photo that will assist me in installing new springs for the flippers?

    Thanks, Eric
  • Chris S.
    Extremely Frequent Poster
    • December 31, 1999
    • 1064

    #2
    Re: 53-54 Soft Top Flipper Moulding Assembly

    eric - shoot me a photo of what you have....
    1954 Corvette #3803 - Top Flight 2012, Bloomington Gold 2012,
    Triple Diamond Award 2012, Gold Concourse Award 2012, Regional and National Top Flight 2014
    1954 Corvette #3666 - "The Blue Devil" - Pennant Blue - restoration started
    1957 Corvette - FI 3 sp - Black and Silver

    Comment

    • Eric F.
      Expired
      • June 30, 2003
      • 319

      #3
      Re: 53-54 Soft Top Flipper Moulding Assembly

      Chris,

      Here's what I have, including one of the new springs. I have the chrome cover but don't show it in the photos. It will be simple to attach after the flipper and spring are properly installed.

      EricFlipper Molding 3.jpgFlipper Molding 2.jpgFlipper Molding 5.jpg

      Comment

      • John L.
        Expired
        • January 31, 2005
        • 207

        #4
        Re: 53-54 Soft Top Flipper Moulding Assembly

        Hi Eric,
        Thought I would jump on this thread....I have an early 54 myself with the flipper mouldings. Have a set but will need restoration - yours look very nice. Are they reproductions or did you have someone restore them for you? Seeking out someone for this work but just do not want to turn them over to anyone.
        Thanks!!
        John Lanning

        Comment

        • Chris S.
          Extremely Frequent Poster
          • December 31, 1999
          • 1064

          #5
          Re: 53-54 Soft Top Flipper Moulding Assembly

          John and Eric
          Steve Newsome and Brett Henderson both restore the flipper mouldings.
          Steve did a set for me last year
          Brett has done count less sets.

          Eric - the top of your flipper moulding cover is missing - do you have it ?
          1954 Corvette #3803 - Top Flight 2012, Bloomington Gold 2012,
          Triple Diamond Award 2012, Gold Concourse Award 2012, Regional and National Top Flight 2014
          1954 Corvette #3666 - "The Blue Devil" - Pennant Blue - restoration started
          1957 Corvette - FI 3 sp - Black and Silver

          Comment

          • Chris S.
            Extremely Frequent Poster
            • December 31, 1999
            • 1064

            #6
            Re: 53-54 Soft Top Flipper Moulding Assembly

            Here is a photo of the top side....Flipper.jpg
            1954 Corvette #3803 - Top Flight 2012, Bloomington Gold 2012,
            Triple Diamond Award 2012, Gold Concourse Award 2012, Regional and National Top Flight 2014
            1954 Corvette #3666 - "The Blue Devil" - Pennant Blue - restoration started
            1957 Corvette - FI 3 sp - Black and Silver

            Comment

            • Eric F.
              Expired
              • June 30, 2003
              • 319

              #7
              Re: 53-54 Soft Top Flipper Moulding Assembly

              I have the cover, which has been finished. I just need a photo that shows how the spring attaches to the flipper. Chris, since you have a restored pair is there any chance you can post or send me a photo of how the tension spring attaches to the flipper? I know the spring applies tension to keep the flipper from bouncing up and down but I can't figure out how it attaches.John, I know what you mean about a reliable source, that's why I restored them myself.

              Comment

              Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"