67 L36 intake manifold gaskets - NCRS Discussion Boards

67 L36 intake manifold gaskets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Lawrence S.
    Very Frequent User
    • April 1, 1993
    • 801

    67 L36 intake manifold gaskets

    Regarding Flight Judging, do the intake manifold gaskets need to conform to the intake like small block gaskets do? I am guessing they get orange overspray as well?

    Thanks guys,

    Lawrence
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43221

    #2
    Re: 67 L36 intake manifold gaskets

    Originally posted by Lawrence Shaw (22476)
    Regarding Flight Judging, do the intake manifold gaskets need to conform to the intake like small block gaskets do? I am guessing they get orange overspray as well?

    Thanks guys,

    Lawrence

    Lawrence------



    Your best bet for judging purposes are the reproduction gaskets offered by Paragon and their distributors. These are very good sealing gaskets, too.
    In Appreciation of John Hinckley

    Comment

    • Lawrence S.
      Very Frequent User
      • April 1, 1993
      • 801

      #3
      Re: 67 L36 intake manifold gaskets

      Ok thanks Joe

      Comment

      • Joe R.
        Extremely Frequent Poster
        • May 31, 2006
        • 1822

        #4
        Re: 67 L36 intake manifold gaskets

        Hi Joe,

        Now that Lawrence's question has been answered, I thought I might hijack the thread slightly with another question. Which is, is your answer true for all 427's (L72 specifically in my case).

        Thanks!!!!
        Joe

        Comment

        • Edward J.
          Extremely Frequent Poster
          • September 15, 2008
          • 6942

          #5
          Re: 67 L36 intake manifold gaskets

          Larry, The gaskets will show over spray on the rubbers, but the problem is the reproductions are missing the tabs with the GM insignia on the end of the rubber seals of the intake.
          New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.

          Comment

          • Wayne M.
            Expired
            • March 1, 1980
            • 6414

            #6
            Re: 67 L36 intake manifold gaskets

            Compare the intake contour to the gaskets (both oval & square port shown) from a GM late '60s service kit, and you may be able to tell where gasket material overlaps, hence subject to factory overspray.





            c

            Comment

            • Joe L.
              Beyond Control Poster
              • February 1, 1988
              • 43221

              #7
              Re: 67 L36 intake manifold gaskets

              Originally posted by Joe Raine (45823)
              Hi Joe,

              Now that Lawrence's question has been answered, I thought I might hijack the thread slightly with another question. Which is, is your answer true for all 427's (L72 specifically in my case).

              Thanks!!!!
              Joe

              Joe------


              Yes.
              In Appreciation of John Hinckley

              Comment

              • Joe L.
                Beyond Control Poster
                • February 1, 1988
                • 43221

                #8
                Re: 67 L36 intake manifold gaskets

                Originally posted by Edward Johnson (49497)
                Larry, The gaskets will show over spray on the rubbers, but the problem is the reproductions are missing the tabs with the GM insignia on the end of the rubber seals of the intake.

                Edward-------


                Yes, the only way to get that nuance is to find a set of NOS gaskets. However, some later NOS gasket sets, while having the GM-embossed end gaskets do not have correct side gaskets.
                In Appreciation of John Hinckley

                Comment

                Working...
                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"