I'm looking for either a picture or a description of the original bolt & nut that attach the lower part of the rear valance on each end. I've seen several different types advertised as correct. I believe the bolt is the washer head type as well as the nut. I've seen nuts with "RBW" that look correct. As expensive as these small," original" items are getting, I want to know I'm looking at originals.
'66 original rear valance lower bolts
Collapse
X
-
Re: '66 original rear valance lower bolts
RR ValanceNuts.JPG
Rob,
I believe these are the bolts you are looking for- Richard Fortier, a Driveline advertiser, has them.- Top
-
Re: '66 original rear valance lower bolts
Here are two as installed pictures on an unrestored car. It is a '65 but I doubt they would have changed.
James- Top
Comment
-
Re: '66 original rear valance lower bolts
Jim's picture shows the correct installation of them as well. Other headmarkings are RSC, EL, E. ARA. Obviously I agree that the pictures Joe was nice enough to post are IMO correct, original valance bolts. ARA- Top
Comment
-
Re: '66 original rear valance lower bolts
Here is where else that nut is used.....
The Washer.....49 1 B5.00 9 2 4728063 Nut
800 Gas Tank Door, Rear Body Emblem & Filler Panel & Tail Pipe Bezel 92 1 E4.00 9 2 4728063 Nut 35-50 lbs. In. 837 Side Door Vent Window & Molding 101 1 E13.00 11 2 4728063 Nut 35-50 lbs. In. 867 Side Door Vent Window
49 1 B5.00 8 2 Washer
800 120392 Gas Tank Door, Rear Body Emblem & Filler Panel & Tail Pipe Bezel 93 1 E5.00 7 4 Washer
800 120392 Side Door Window Mechanism 133 6 C1.00 7 1 Washer
800 120392 Accelerator - Rod, Lever & Spring 230 C07 6.00 16 2 Washer
867 120392 Hard Top - Moldings & Top Attachment
This was the only location for the bolt....
- Top
Comment
-
Re: '66 original rear valance lower bolts
These bolts don't appear to have an indented head as do the ones in the post by James.- Top
Comment
Comment