1960 coil bracket bolts
What would be appropriate head bolt markings on a 1960 coil bracket? Any difference on a fuel car?
-
-
Re: 1960 coil bracket bolts
Lynn, I have seen several logos/brands used on the fuel car coil bracket. "WB1c" appears to be the most common. I also see "UR"
and just a maybe on RBW or RSC.
Remember you need two different lengh bolts for a fuel car baseplate to coil bracket. The one in the center is shorter. If you use a 5/8" long one in the cener you may break out the boss on the other side of the baseplate and have serious engine issue.
I wish I could purchase a qty of WB1C's for little bucks. John -
Re: 1960 coil bracket bolts
Thanks for recommendation, Really appreciate "heads-up" on length!Comment
-
Re: 1960 coil bracket bolts
You are most welcome Lynn.
If the baseplate/intake is off the engine look at the bottom side of it. You will see a boss hanging down for the one coil bracket bolt. I have seen my share of cracked bosses ready to fall off into the engine. All because of a bolt that's too long. JohnComment
Comment