4 speeds - NCRS Discussion Boards

4 speeds

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mario diteodoro

    4 speeds

    I have two 4 speed geag boxes i need decoded and the gear ratios, first is a b&w #wj51-2210027 and the other is a muncie #p080b180155. Thanks Mario.
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43203

    #2
    Re: 4 speeds

    Mario------

    I would say that the Borg Warner T-10 was produced on October 5, 1961. From the information provided, I can't tell the ratio.

    The Muncie date coding does not look correct to me. However, it MAY be a 1970 model year transmission and the close ratio (M21) variant.
    In Appreciation of John Hinckley

    Comment

    • Wayne M.
      Expired
      • March 1, 1980
      • 6414

      #3
      Need more Muncie info

      Can't help you on the B-W.

      What's the part # cast on the top line driver side maincase; ie. 3851325, 3885010, 3925660 or 3925661 ?

      Where is the P assembly date located ? Are there 10 splines on the input shaft, and are there none, 1 or 2 circumferential rings.

      is the "b" at the end of the P number, or is it located at the start of the 180155 ?

      Pics would be preferred, but if you could provide this info, we can go from there.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"