Lower steering column component finishes

[Greg L.]

Would someone please be able to tell me what the proper finish is for
:the cast coupler and it's bolt that connects the rag joint to the steering column shaft.
:the "tie rod sleeve" clamp and it's bolt & nut that is located about 1/2" further up the steering column shaft from this cast coupler.
:the little cup/cap that slips over the lower end of the steering column tube.
:the spring/clip that holds this cup/cap onto the steering column tube.
Thanks

[Joe L.]

Re: Lower steering column component finishes

Greg-----

For 68-76, the components that you inquired about were all black/gray phosphate finished.

[Harold #43147]

Color

If you Zinc Plate the parts first and then use a Black Oxide dip it will duplicate Black Phosphate kind of has a little sparkle when the sun hits it

[Greg L.]

Re: Color

Thanks again guys.