72 vac hose tee - NCRS Discussion Boards

72 vac hose tee

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rich P.
    Expired
    • January 12, 2009
    • 1361

    #16
    Re: 72 vac hose tee

    Ken,

    now that I know which application you needed it for here is a picture of it and yes all these wre 1/4" across the top and 1/16" on the leg.
    For those following this thread this is the fitting that supplys vaccum from the main line off the intake fitting to the Astro Ventilation/ heater control line that comes through the firewall and into the engine compartment.

    I don't know if they repro these or not. I took this off an original 69 435 many years ago.

    Rich

    Comment

    • Rich P.
      Expired
      • January 12, 2009
      • 1361

      #17
      Re: 72 vac hose tee

      OOPPS here is the picture.

      Rich
      Attached Files

      Comment

      • Bryan M.
        Expired
        • April 1, 1999
        • 386

        #18
        Re: 72 vac hose tee

        Originally posted by Rich Pasqualone (49858)
        Ken,

        now that I know which application you needed it for here is a picture of it and yes all these wre 1/4" across the top and 1/16" on the leg.
        For those following this thread this is the fitting that supplys vaccum from the main line off the intake fitting to the Astro Ventilation/ heater control line that comes through the firewall and into the engine compartment.

        I don't know if they repro these or not. I took this off an original 69 435 many years ago.

        Rich
        The OP stated his car is a BB. Is this fitting big block specific?
        Thanks!

        Comment

        • Rich P.
          Expired
          • January 12, 2009
          • 1361

          #19
          Re: 72 vac hose tee

          Bryan,

          No this TEE is for all cars SB, BB A/C and Non A/C. In the 69 AIM you will find this under UPC1 Sheet M3.
          also on the 1/16" leg it uses the same 3 prong clamp that is used on the washer hose to wiper arm connection (AIM # 3891759)

          Rich

          Comment

          • Bryan M.
            Expired
            • April 1, 1999
            • 386

            #20
            Re: 72 vac hose tee

            Originally posted by Rich Pasqualone (49858)
            Bryan,

            No this TEE is for all cars SB, BB A/C and Non A/C. In the 69 AIM you will find this under UPC1 Sheet M3.
            also on the 1/16" leg it uses the same 3 prong clamp that is used on the washer hose to wiper arm connection (AIM # 3891759)

            Rich
            I found it! But no clamp on it. I'll have to dig through my parts to see if I can find one.
            Attached Files

            Comment

            • Terry M.
              Beyond Control Poster
              • September 30, 1980
              • 15582

              #21
              Re: 72 vac hose tee

              Not all cars had the clamp.
              Terry

              Comment

              • Rich P.
                Expired
                • January 12, 2009
                • 1361

                #22
                Re: 72 vac hose tee

                Terry,

                I think you right it was a hit or miss with the clamp.

                Rich

                Comment

                • Ken C.
                  Expired
                  • August 31, 2006
                  • 120

                  #23
                  Re: 72 vac hose tee

                  thanks Rich and Bryan, that is the tee i'm looking for. Only been 3+ yrs.

                  Comment

                  • Chris F.
                    Expired
                    • April 1, 2006
                    • 23

                    #24
                    Re: 72 vac hose tee

                    Hello Ken,
                    Was this the vacuum "T" I was asking about on the Corvette Forum.
                    I ended up making one out of copper tubing, then found a T at Corvette Central which is very close. It is off white in color however is as close as I think you will find. The part # is 303324 Vac Hose T-PCV Valve Emission Hose 70 - 73.

                    Best regards,
                    Chris

                    Comment

                    Working...
                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"